+7 (499) 702-01-13
+7 (499) 702-03-59
Пн-Пт с 9:00 до 18:00

Схема MTD E 660 G (31AV6LHG678) (2006) 01 Dashboard, Discharge chute, Handle

1 HANDLE, CLUTCH LOCK, LH
2 HANDLE, CLUTCH LOCK, RH
3 HANDLE ASSY ENGAGEMENT LH
4 HANDLE ASSY ENGAGEMENT RH
5 SCR:AB:#10-16:0.500:HXINDWSH
6 SCREW:TT:1/4-20:1.750:HXINDWSH
7 SCR:MACH:#10-24:1.375:OVALCSK
8 NUT:FLGLK:1/4-20:GRF:NYLON
8 NUT:FLGLK:1/4-20:GRF:NYLON
9 GRIP:1.0 ID x 5.0 LG
10 KNOB, SHIFT
11 DASH PANEL
12 SPR:CMPRS:.39 x.60 x.88 LG
13 BUMPER-RUBBER:.62 OD x.22 THK
14 WASK:FLAT:.385 x.870 x.092
15 WASH:FLAT: .250 x .630 x .052
15 WASH:FLAT: .250 x .630 x .052
16 SCR:SHLDR:.437x 1.345:1/4-20
17 SCR:SHLD:.374 DIA x 1.05 LG
18 CABLE: SELECTOR: SPEED
19 SUPPORT
20 BRACKET-FRONT LIFT
21 LVR:SHFT
22 CRANK ASM-CHUTE
23 BOLT:CRG:5/16-18:2.50:GR1
24 SCR:TT:5/16-18:0.750:HXINDWSH
25 PIN:COT:.072 DIA x 1.13 LG
26 KNOB:CRK:1.00 DIA x 3.2 CHUTE
27 WING NUT
28 CAP
29 GROM:RUBBER:.44 IDx.94 ODx.50
30 WASH-FLAT:.375x.738x.063
31 WASH:SDL:.320 x.93 x.060
32 BOLT-EYE
33 LOWER HANDLE
34 HANDLE UPPER RH
35 HANDLE UPPER LH
36 LOWER CHUTE
37 SCREW:CRG:SPL:5/16-18:1.00
38 FLANGED NUT 5/16-18:GRF:NYLON
39 BOLT:CARR:5/16-18:1.000:CUSTOM
40 BOLT:CRG:5/16-18:.750 GR1
41 UPPER CHUTE
42 WASH .349 ID X .879 OD X .063
43 BRG:FLG:SNAP .385 ID
44 BRACKET: CHUTE CRANK
45 KEEPER, FLANGE
46 LENS
47 LABEL
48 SCR:PLASTITE:#8-16 x.50
49 SHCS:1/4-20:.375
50 KIT-CLU INTERLOCK
51 NUT:HEX:1/4-20:SHLDR
52 PLATE, LOCK
53 CAM, LOCK
54 Spring
55 SPRING:TORSION:0.8156IDx.3038
56 BULB
57 CORD ASSY
58 SOC:LAM: 1/4 TURN
59 CBL:TIE: 3/16 X .05 X 7.4
60 CHUTE GUARD ASM:5\" PLSTC EXPT.
61 SHLD SCR .375 DIA x.181
63 EXTENSION SPRING:.36 OD
65 SCR:HHCS:1/4-20:1.00:GR5:SPEC